************************************************************
************************************************************
*
*  Intel(R) INF Installation Utility
*  Release Notes
*
*  Revision:   Version 2.10 Production Release Build 0002
*  Date:       August 19, 1999
* 
*  NOTE:  This document refers to systems containing the 
*         following Intel chipset(s):
*              Intel(R) 810 Chipset 
*
************************************************************
************************************************************

************************************************************
*       CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  Overview
2.  Updated Product Information
3.  Release-Specific Information
    3A.  New Features Included in This Release
    3B.  Fixes Included in This Release
    3C.  Software Sightings and/or Known Issues for This Release
    3D.  Testing Information for This Release
4.  Troubleshooting Information

************************************************************
* 1.  OVERVIEW
************************************************************

These release notes outline the new features and key changes
of this software since the last release.  Additional
information regarding troubleshooting, software sightings,
and bug fixes is also included here.

************************************************************
* 2.  UPDATED PRODUCT INFORMATION
************************************************************

Revision:  Version 2.10 Production Release Build 0002 Information:

    1.  Windows* 98 Digital Signature Files are installed for
        the following INF files:
             810.INF
             ICHx.INF
             ICHxIDE.INF
             ICHxSMB.INF
             ICHxUSB.INF
             IFWH.INF

************************************************************
* 3.  RELEASE-SPECIFIC INFORMATION
************************************************************

This section includes new features from the previous release 
and/or updated information about the product that was added 
after the primary documentation was completed.

************************************************************
* 3A.  NEW FEATURES INCLUDED IN THIS RELEASE
************************************************************

Revision:  Version 2.10 Production Release Build 0002 Information:

    1.  Windows 98 Digital Signature Files are installed for 
        certain INF files.  Refer to Section 2 (Updated
        Product Information) for more details.

        Additional files added to release kit:
            810.CAT
            ICH.CAT
            ICHxIDE.CAT
            ICHxSMB.CAT
            ICHxUSB.CAT
            IFWH.CAT

************************************************************
* 3B.  FIXES INCLUDED IN THIS RELEASE
************************************************************

Revision:    Version 2.10 Production Release Build 0002 Information:

    1.  Previous release of the software writes to the registry
        an incorrect version number when the software is 
        invoked in the Silent mode.  This defect has been
        corrected in this build.

************************************************************
* 3C.  SOFTWARE SIGHTINGS AND/OR KNOWN ISSUES FOR THIS RELEASE
************************************************************

Revision:    Version 2.10 Production Release Build 0002 Information:
    1.  This software will install the ICHxSMB.INF file on 
        systems running Windows 98 Second Edition even though 
        the SMBus device is natively supported by the OS.
        This is done to allow easy update of any future SMBus
        driver.

    2.  A Change Driver prompt may be displayed from Windows 
        setup on devices with PCI Subsystem ID fields 
        programmed to a non-zero value.  
        
    3.  During the Windows setup stage, the USB keyboard 
        and mouse may not be accessible because the
        legacy USB driver may be inactive when Windows 
        enters the GUI mode.  There is a small window
        of time during which it may not be possible for the
        system to accept user input.  Since the INF
        Installation Utility may cause prompts during the
        Windows setup stage, it should not be used on systems
        with a USB keyboard and mouse as the sole input
        devices.

    4.  When the INF Installation Utility is run on a system 
        with the Windows 95 Original Release, the Device
        Manager may report a memory resource conflict.  This
        conflict involves the resources allocated to PCI
        cards that are located behind a PCI bridge.  The
        operating system incorrectly reports a memory
        conflict, even though the memory resources in
        question are fully contained within the PCI bridge
        aperture.  This appears to be a known issue with the
        Windows 95 operating system.  The INF Installation
        Utility operation has no effect on this issue.

    5.  Older revisions of the Intel(R) LANDesk(R) Software Package 
        may cause a Device Manager warning when installed on 
        a system after the INF Installation Utility has been 
        executed on the system.
        
************************************************************
* 3D.  TESTING INFORMATION FOR THIS RELEASE
************************************************************

Revision:    Version 2.10 Production Release Build 0002 Information:
    This software release has been validated with systems 
    containing the following Intel chipsets:
          Intel(R) 810 Chipset
          Intel(R) 440BX AGPset       

************************************************************
* 4.  TROUBLESHOOTING INFORMATION
************************************************************

Please refer to Readme.txt for the list of the general
troubleshooting techniques.

************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or 
warranty.  
The INTEL SOFTWARE LICENSE AGREEMENT
(OEM / ISV Distribution & Single User) 
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in connection with 
Intel products.  No license, express or implied, by estoppel 
or otherwise, to any intellectual property rights is granted 
by this document.  Intel assumes no liability whatsoever, 
and Intel disclaims any express or implied warranty, 
relating to sale and/or use of Intel products including 
liability or warranties relating to fitness for a particular 
purpose, merchantability, or infringement of any patent, 
copyright or other intellectual property right.  Intel 
products are not intended for use in medical, life saving, 
or life sustaining applications.

************************************************************
Intel Corporation disclaims all warranties and liabilities 
for the use of this document and the information contained 
herein, and assumes no responsibility for any errors which 
may appear in this document, nor does Intel make a 
commitment to update the information contained herein. Intel 
reserves the right to make changes to this document at any 
time, without notice.
************************************************************
************************************************************

* Third-party brands and names are the property of their 
respective owners.

Copyright (c) Intel Corporation, 1997-1999