;
;  File name:  CE100B.LDI
;  VeRsIoN=1.19 
;  Intel(R)PRO/100+ Installation Information File
;  CoPyRiGhT=(c)Copyright 2000 by Intel Corporation, All rights reserved.
;  Help file for NetWare Server driver
;
;- File: CE100B.LDI
;- This file handles all PRO/100 family adapters :
;- Intel(R) PRO PCI Adapter
;- PRO/100+ Server Adapter
;- PRO/100+ PCI Adapter
;- PRO/100+ Management Adapter
;- PRO/100B PCI with TX Physical Layer
;- PRO/100B PCI with T4 Physical Layer


VER: 1.18
SYN: 1.00

   DR CE100B
   {
      DES: $CE100B_1
      HELP: $CE100B_2
      PAR: 2.00
      Prod: 'PCI.8086.1229.8086.0001.*'
      Prod: 'PCI.8086.1229.8086.0002.*'
      Prod: 'PCI.8086.1229.8086.0003.*'
      Prod: 'PCI.8086.1229.8086.0004.*'
      Prod: 'PCI.8086.1229.8086.0005.*'
      Prod: 'PCI.8086.1229.8086.0006.*'
      Prod: 'PCI.8086.1229.8086.0007.*'
      Prod: 'PCI.8086.1229.8086.0008.*'
      Prod: 'PCI.8086.1229.8086.0009.*'
      Prod: 'PCI.8086.1229.8086.000A.*'
      Prod: 'PCI.8086.1229.8086.000B.*'
      Prod: 'PCI.8086.1229.8086.000C.*'
      Prod: 'PCI.8086.1229.8086.000D.*'
      Prod: 'PCI.8086.1229.8086.000E.*'
      Prod: 'PCI.8086.1229.8086.0010.*'
      Prod: 'PCI.8086.1229.8086.0011.*'
      Prod: 'PCI.8086.1229.8086.0012.*'
      Prod: 'PCI.8086.1229.8086.0013.*'
      Prod: 'PCI.8086.1229.8086.0040.*'
      Prod: 'PCI.8086.1229.8086.0041.*'
      Prod: 'PCI.8086.1229.8086.0042.*'

      Prod: 'PCI.8086.1229.8086.1009.*'
      Prod: 'PCI.8086.1229.8086.10F0.*'
      Prod: 'PCI.8086.1229.8086.100C.*'
      Prod: 'PCI.8086.1229.8086.1012.*'
      Prod: 'PCI.8086.1229.8086.1013.*'
      Prod: 'PCI.8086.1229.8086.1014.*'
      Prod: 'PCI.8086.1229.8086.1015.*'
      Prod: 'PCI.8086.1229.8086.1016.*'
      Prod: 'PCI.8086.1229.8086.1017.*'
      Prod: 'PCI.8086.1229.8086.1040.*'
      Prod: 'PCI.8086.1229.8086.1041.*'
      Prod: 'PCI.8086.1229.8086.1042.*'

      Prod: 'PCI.8086.2449.8086.3010.*'
      Prod: 'PCI.8086.2449.8086.3011.*'
      Prod: 'PCI.8086.2449.8086.3013.*'
      Prod: 'PCI.8086.2449.8086.3014.*'

      Prod: 'PCI.8086.1229.8086.*.*'
      Prod: 'PCI.8086.1029.8086.*.*'
      Prod: 'PCI.8086.1229.*.*.01'
      Prod: 'PCI.8086.1229.*.*.02'
      Prod: 'PCI.8086.1229.*.*.04'
      Prod: 'PCI.8086.1229.*.*.05'
      Prod: 'PCI.8086.1229.*.*.06'
      Prod: 'PCI.8086.1229.*.*.08'
      Prod: 'PCI.8086.1229.*.*.09'
      Prod: 'PCI.8086.1229.*.*.0A'
      Prod: 'PCI.8086.1229.*.*.0C'

      Prod: 'PCI.8086.1229.1014.005C.*'
      Prod: 'PCI.8086.1229.1014.305C.*'
      Prod: 'PCI.8086.1229.1014.405C.*'
      Prod: 'PCI.8086.1229.1014.505C.*'
      Prod: 'PCI.8086.1229.1014.605C.*'
      Prod: 'PCI.8086.1229.1014.01BC.*'
      Prod: 'PCI.8086.1229.1014.0040.*'
      Prod: 'PCI.8086.1229.1014.0041.*'
      Prod: 'PCI.8086.1229.1014.105C.*'
      Prod: 'PCI.8086.1229.1014.705C.*'
      Prod: 'PCI.8086.1229.1014.805C.*'
      Prod: 'PCI.8086.1229.1014.01F1.*'
      Prod: 'PCI.8086.1229.1014.01F2.*'

      ;@# SPROD:    'Intel~ PRO/100B PCI Adapter (TX)',
      ;@# 	    'Intel~ PRO/100+ PCI Adapter (T4)',
      ;@# 	    'Intel~ PRO/10+ PCI Adapter',
      ;@# 	    'Intel~ PRO/100 WfM PCI Adapter',
      ;@# 	    'Intel~ 82557-based Integrated Ethernet PCI (10/100)',
      ;@# 	    'Intel~ 82557-based Integrated Ethernet with Wake on LAN*',
      ;@# 	    'Intel~ 82558-based Integrated Ethernet',
      ;@# 	    'Intel~ 82558-based Integrated Ethernet with Wake on LAN*',
      ;@# 	    'Intel~ PRO/100+ PCI Adapter',
      ;@#           'Intel~ PRO/100+ Management Adapter',
      ;@#           'Intel~ PRO/100+ Adapter',
      ;@#           'Intel~ PRO/100+ Management Adapter',
      ;@#           'Intel~ PRO/100+ Alert on LAN* 2 Management Adapter',
      ;@#           'Intel~ PRO/100+ Alert on LAN* Management Adapter',
      ;@#           'Intel~ PRO/100 S Management Adapter',
      ;@#           'Intel~ PRO/100 S Management Adapter',
      ;@#           'Intel~ PRO/100 S Advanced Management Adapter',
      ;@#           'Intel~ PRO/100 S Advanced Management Adapter',
      ;@#           'Intel~ PRO/100 S Desktop Adapter',
      ;@#           'Intel~ PRO/100 S Desktop Adapter',
      ;@#           'Intel~ PRO/100 Desktop Adapter',

      ;@#           'Intel~ PRO/100+ Server Adapter',
      ;@#           'Intel~ PRO/100+ Dual Port Server Adapter',
      ;@#           'Intel~ PRO/100+ Server Adapter',
      ;@#           'Intel~ PRO/100 S Server Adapter',
      ;@#           'Intel~ PRO/100 S Server Adapter',
      ;@#           'Intel~ PRO/100 Dual Port Server Adapter',
      ;@#           'Intel~ PRO/100 S Dual Port Server Adapter',
      ;@#           'Intel~ PRO/100 S Dual Port Server Adapter',
      ;@#           'Intel~ PRO/100+ Dual Port Server Adapter',
      ;@#           'Intel~ PRO/100 S Server Adapter',
      ;@#           'Intel~ PRO/100 S Server Adapter',
      ;@#           'Intel~ PRO/100 Server Adapter',

      ;@#           'Intel~ PRO/100 VE Desktop Adapter',
      ;@#           'Intel~ PRO/100 VM Desktop Adapter',
      ;@#           'Intel~ PRO/100 VE Network Connection',
      ;@#           'Intel~ PRO/100 VM Network Connection',

      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',
      ;@# 	    'Intel~ PRO PCI Adapter',

      ;@# 	    'IBM~ IBM 10/100 EtherJet PCI Adapter',
      ;@# 	    'IBM~ IBM 10/100 EtherJet PCI Management Adapter',
      ;@# 	    'IBM~ IBM 10/100 EtherJet PCI Adapter with Alert on LAN',
      ;@# 	    'IBM~ IBM 10/100 EtherJet Secure Management Adapter',
      ;@# 	    'IBM~ IBM 10/100 EtherJet Secure Management Adapter',
      ;@# 	    'IBM~ IBM 10/100 EtherJet Integrated LAN with Alert on LAN',
      ;@# 	    'Intel~ PRO/100 S Desktop Adapter',
      ;@# 	    'Intel~ PRO/100 S Desktop Adapter',
      ;@# 	    'IBM~ IBM Netfinity 10/100 Ethernet Adapter',
      ;@# 	    'IBM~ IBM Netfinity 10/100 Ethernet Security Adapter',
      ;@# 	    'IBM~ IBM Netfinity 10/100 Ethernet Security Adapter',
      ;@# 	    'IBM~ IBM Netfinity 10/100 Ethernet Security Adapter 2',
      ;@# 	    'IBM~ IBM Netfinity 10/100 Ethernet Security Adapter 2'

      ;@# Client:        E100BODI.COM, CE100B.LAN, E100B.LAN

      ;@# Alias:         CE100B.LAN, E100B.LAN

      FILE: CE100B.LAN

      ;comment in the next line to copy IANS.LAN
      OF: IANS.lan

      PR SLOT REQ
      {
         HELP:  $CE100B_3
         TYP:  DEC (5)
         VAL:   1 - 65535
         DEF:  UND
      }

      PR SPEED OPT
      {
         DES:   "Speed"
         TYP:  DEC (3)
         HELP:  $CE100B_4
         VAL:   0, 10, 100
         DEF:   0
         OUT:   'SPEED=%s'
      }

      PR FORCEDUPLEX OPT
      {
         DES:   "Force Duplex"
         HELP:  $CE100B_5
         TYP:  DEC (1)
         VAL:   0, 1, 2
         DEF:   0
         OUT:   'FORCEDUPLEX=%s'
      }

      PR IOMAPMODE OPT
      {
         DES:   "IO Map Mode"
         HELP:  $CE100B_6
         TYP:  DEC (1)
         VAL:   0, 1
         DEF:   0
         OUT:   'IOMAPMODE=%s'
      }

      ;to include TXTHRESHOLD, please uncomment out this line
      ;PR    TXTHRESHOLD    OPT
      ;and comment out this one.
      PR    TXTHRESHOLD    HID
      {
         DES:    "Transmit Threshold"
         Help:   $CE100B_12
         TYP:    DEC (3)
         VAL:    0-200
         DEF:    0
         Out:    'TXTHRESHOLD=%s'
      }


      FR FrameSelect
      {
         HELP:  $CE100B_7

         CD:    $CE100B_8
         CH:    'Ethernet_802.2'
         CD:    $CE100B_9
         CH:    'Ethernet_802.3'
         CD:    $CE100B_10
         CH:    'Ethernet_SNAP'
         CD:    $CE100B_11
         CH:    'Ethernet_II'

         DEF:   1,2,3,4
      }

   }

DLANG: 4
;English

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100+ Dual Port Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (FULL)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."

LANG: 6
;French

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "Ce pilote prend en charge les cartes r�seau
                          EtherExpress(MC) PRO PCI suivantes ->\n
                          carte PRO/100+ PCI\n
                          carte PRO/100+ Management\n
                          carte PRO/100+ Server\n
                          carte PRO/100B avec TX Physical Layer\n
                          carte PRO/100B avec T4 Physical Layer\n\n"

       $CE100B_3 = "Num�ro d'emplacement de la carte.
                          Pour les cartes PCI, il s'agit de l'emplacement
                          du dispositif."

       $CE100B_4 = "Annulation de d�bit de ligne pour la carte.
                          D�sactive l'auton�gotiation. Doit �tre forc�e
                          si le mode duplex est pr�cis�. Les options valides
                          sont 0 (auto), 10 et 100."

       $CE100B_5 = "Force le mode de fonctionnement duplex int�gral.
                          Le param�tre SPEED doit �tre pr�cis� et valide
                          pour ce mot-cl�. Les options valides sont 0 (auto),
                          1 (semi) et 2 (duplex)."

       $CE100B_6 = "Force la carte � utiliser le mode de mappage E/S.
                          Le mode par d�faut est mappage m�moire.
                          Les options valides sont 0 (d�faut) et 1."

       $CE100B_7 = "Le pilote adopte par d�faut le format de trame 802.2.
                          Vous pouvez utiliser cette valeur par d�faut ou
                          s�lectionner des 3 autres options
                          => 802.3, Ethernet II et Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."

LANG: 7
;German

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "Dieser Treiber unterst�tzt die folgenden
                          EtherExpress(TM)-Adapter der PRO-PCI-Familie ->\n
                          PRO/100+-PCI-Adapter\n
                          PRO/100+-Management-Adapter\n
                          PRO/100+-Server-Adapter\n
                          PRO/100B Adapter mit physikalischer TX-Schicht\n
                          PRO/100B Adapter mit physikalischer T4-Schicht\n\n"

       $CE100B_3 = "Steckplatznummer f�r den Adapter.
                          Bei PCI-Adaptern bezeichnet dies die Ger�teposition."

       $CE100B_4 = "Die f�r den Adapter vorrangige Leitungsgeschwindigkeit.
                          Deaktiviert die automatische Absprache.
                          Mu� bei Angabe der Betriebsart Vollduplex
                          festgelegt werden. Zul�ssige Optionen sind
                          0 (Automatisch), 10 und 100."

       $CE100B_5 = "Legen Sie die Betriebsart Vollduplex fest.
                          SPEED mu� f�r dieses Schl�sselwort festgelegt
                          und zul�ssig sein. Zul�ssige Optionen sind
                          0 (Automatisch), 1 (HALBDUPLEX), 2 (DUPLEX)."

       $CE100B_6 = "Legen Sie fest, da� der Treiber die der E/A zugeordnete
                          Betriebsart verwendet. Die Standardbetriebsart ist
                          speicherbezogen. Zul�ssige Optionen sind
                          0 (STANDARD) und 1."

       $CE100B_7 = "Standardm��ig wird f�r den Treiber das Rahmenformat 802.2
                          eingestellt. Sie k�nnen diese Standardeinstellung
                          ben�tzen oder von den anderen drei Optionen w�hlen
                          => 802.3, Ethernet II oder Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."

LANG: 8
;Italian

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "Questo driver supporta i seguenti adattatori
                          EtherExpress(TM) PRO PCI ->\n
                          Adattatore PRO/100+ PCI\n
                          Adattatore PRO/100+ Management\n
                          Adattatore PRO/100+ Server\n
                          Adattatore PRO/100B con TX Physical Layer\n
                          Adattatore PRO/100B con T4 Physical Layer\n\n"

       $CE100B_3 = "Numero slot per l'adattatore.
                          Per gli adattatori PCI, si riferisce alla posizione
                          del dispositivo."

       $CE100B_4 = "Superamento della velocit� di linea per l'adattatore.
                          Disabilita l'autonegoziazione. Deve essere forzata
                          se viene specificata la modalit� duplex.
                          Opzioni valide sono 0 (Auto), 10 o 100."

       $CE100B_5 = "Forzare la modalit� di funzionamento a Full duplex.
                          La VELOCITA' deve essere specificata e valida per
                          la parola chiave. Opzioni valide sono
                          0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Forzare il driver ad usare la modalit� mappata di I/O.
                          La modalit� predefinita � mappata in memoria.
                          Opzioni valide sono 0 (DEFAULT) o 1."

       $CE100B_7 = "Il driver � impostato per default al formato frame 802.2.
                          Utilizzare il valore predefinito oppure scegliere
                          dalle altre 3 opzioni => 802.3, Ethernet II e
                          Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG: 14
;Spanish

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "Este controlador admite los siguientes adaptadores
                          EtherExpress(TM) de la familia PRO PCI ->\n
                          adaptador PRO/100+ PCI\n
                          adaptador PRO/100+ Management\n
                          adaptador PRO/100+ Server\n
                          adaptador PRO/100B con capa f�sica TX\n
                          adaptador PRO/100B con capa f�sica T4\n\n"

       $CE100B_3 = "N�mero de ranura para el adaptador.
                          Para adaptadores PCI, se refiere a la ubicaci�n
                          del dispositivo."

       $CE100B_4 = "Alteraci�n de velocidad de l�nea para el adaptador.
                          Anula la negociaci�n autom�tica. Debe forzarse si
                          se especifica el modo d�plex.
                          Las opciones v�lidas son 0 (autom�tico), 10 o 100."

       $CE100B_5 = "Fuerza el modo de operaci�n a d�plex completo.
                          Debe especificarse un valor para SPEED que sea
                          v�lido para esta palabra clave. Las opciones v�lidas
                          son 0 (autom�tico), 1 (medio), 2 (completo)."

       $CE100B_6 = "Fuerza el controlador a utilizar el modo asignado de E/S.
                          El modo predeterminado es asignado de acuerdo
                          con la memoria. Las opciones v�lidas son
                          0 (PREDETERMINADO) o 1"

       $CE100B_7 = "El controlador tiene el valor predeterminado de formato
                          de trama 802.2. Puede utilizar este valor
                          predeterminado o seleccionar de las otras 3
                          opciones => 802.3, Ethernet II y Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG: 9
;Japanese

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "����LAN�h���C�o�́A�ȉ���Intel EtherExpress(TM)
                         PRO PCI�A�_�v�^���T�|�[�g���Ă��܂��B\n
                         � PRO/100+ PCI �A�_�v�^\n
                         � PRO/100+ Management �A�_�v�^\n
                         � PRO/100+ Server �A�_�v�^\n
                         � PRO/100B with TX Physical Layer\n
                         � PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "�A�_�v�^�̃X���b�g�ԍ��B
                         PCI �A�_�v�^�ł́A�f�o�C�X�E���P�[�V�����������܂��B"

       $CE100B_4 = "�A�_�v�^�̒ʐM���x����B�����F���𖳌��ɂ��܂��B
                          �f���v���b�N�X���[�h�w�莞�́A�K���w�肵�Ă��������B
                          �L���Ȓl�� 0(����), 10 �܂��� 100 �ł��B"

       $CE100B_5 = "�����I�ɑS��d���[�h��ݒ肵�܂��B
                          [Speed]��K���w�肵�āA���̃L�[���[�h��L���ɂ��Ă��������B
                          �L���Ȓl�� 0(�����F��), 1(����d), 2(�S��d) �ł��B"

       $CE100B_6 = "�h���C�o��I/O�}�b�v�E���[�h�Ŏg�p���܂��B
                          �f�t�H���g�́A�������[�}�b�v�E���[�h�ł��B
                          �L���Ȓl�� 0(�f�t�H���g) �܂��� 1 �ł��B"

       $CE100B_7 = "�f�t�H���g�̃t���[���E�t�H�[�}�b�g�́A802.2�ł��B
                            ���̑��ɃI�v�V�����Ƃ��āA802.3�AEthernet II�����Ethernet SNAP
                            �̃t���[���E�t�H�[�}�b�g���g�p�ł��܂��B"

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG:   12
;Portugese

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following EtherExpress(TM)
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG:   10
;Korean

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following EtherExpress(TM)
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG:   1
;Chinese (simplified)

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following EtherExpress(TM)
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


LANG:   16
;Chinese (traditional)

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following EtherExpress(TM)
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."

LANG:   13
;Russian

       $CE100B_1 = "Intel(R) PRO PCI Adapter (CHSM spec 1.11)"

       $CE100B_2 = "This driver supports the following EtherExpress(TM)
                         PRO PCI family adapters ->\n
                         PRO/100+ PCI Adapter\n
                         PRO/100+ Management Adapter\n
                         PRO/100+ Server Adapter\n
                         PRO/100B with TX Physical Layer\n
                         PRO/100B with T4 Physical Layer\n\n"

       $CE100B_3 = "Slot number for the adapter.\n
                          For PCI adapters, this refers to the Device Location."

       $CE100B_4 = "Line speed override for the adapter. Disables
                          auto-negotiation. Must be forced if duplex mode is specified.\n
                          Valid options are 0 (Auto), 10, or 100."

       $CE100B_5 = "Force the operating mode to Full Duplex.\n
                          SPEED must be specified and valid for this keyword.\n
                          Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."

       $CE100B_6 = "Force the driver to use I/O mapped mode.\n
                          The default mode is memory-mapped.\n
                          Valid options are 0 (DEFAULT) or 1."

       $CE100B_7 = "The driver defaults to 802.2 frame format. You
                            may use this default or select from the other 3
                            options => 802.3, Ethernet II and Ethernet SNAP."

       $CE100B_8 = "E100B 802.2"

       $CE100B_9 = "E100B 802.3"

       $CE100B_10 = "E100B SNAP"

       $CE100B_11 = "E100B E_II"

       $CE100B_12 = "Force the hardware to wait for more of the outgoing
                          frame to be transferred to the card before
                          transmitting onto the wire.  The range is
                          1(8 Bytes) to 200 (1600 Bytes, wait until full
                          frame DMAed)."


;DrIvEr DeScRiPtIoN EnD